Product Overview
This flexible self-regulating heating cable is designed for household water pipe and solar water heater freeze protection in winter. It automatically regulates its heat output and maintains water temperature above 0 °C without requiring a controller.
Features & Structure
- Pure copper conductor
- PTC heating element
- PVC insulation
- Flame retardant design
- Very soft and easy to wrap around small metal and plastic pipes
Specifications Summary
| Property | Value |
|---|---|
| Voltage | 220-240 V |
| Power Output | 20 W/m at 10 °C |
| Max Working Temperature | 60 °C |
| Min Installation Temperature | -40 °C |
| Start-up Current | Less than 0.6 A/m |
| Maximum Circuit Length | 20 m |
Installation Instructions
- Seal the end of the cable with a heat shrinkable tube or electrical insulating tape. Do not connect the two conductors together.
- Connect the other end with a cold wire or plug for power supply connection.
- Wrap the heating cable on water pipes or fasten it straight along the pipes. Secure the cable every 30 to 60 cm using thermal tape or aluminum tape.
- Optionally wrap a layer of rubber insulation over the pipe to enhance heating efficiency, save energy, and protect the cable.
- Plug into a 220–240 V power supply.
Important Safety Warnings
- Do not use this cable inside water or inside pipes.
Available Options
Available in multiple length variations to suit your installation needs.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent