HELP CENTRE

Frequently asked questions

Find practical guidance for choosing, installing, and using our products.

Industrial Heating Elements

How do I select the correct cartridge heater size?

Check the sheath diameter and tolerance, insertion length, available mounting depth and lead-exit arrangement against the equipment drawing. Also match voltage, wattage and the required temperature-sensor type if one is built in.

The fit between the cartridge and its bore affects heat transfer. Use the heater manufacturer's specified bore tolerance for the application rather than choosing a part solely because it can be pushed into the hole.


Does a cartridge heater with a thermocouple control its own temperature?

An integrated thermocouple provides a temperature signal; it does not by itself switch the heater or regulate its temperature. The heater needs a compatible controller and an appropriately rated switching arrangement.

Confirm the thermocouple type, polarity and wiring diagram, and identify the sensor leads separately from the heater power leads. Do not connect sensor leads to the heater supply.


Can I bend or reshape a tubular heating element?

Only if the exact model is designed for forming and its instructions permit it. Many preformed elements are intended to retain their supplied shape. Bending a finished heater without approved limits can damage its sheath or internal insulation.

For a formable model, obtain the minimum bend radius, permitted forming areas and method before making changes. Do not bend terminals or assume that all products described as tubular or flexible have the same forming limits.


How do I measure a replacement band heater?

Measure the outside diameter of the barrel or cylinder where the band will sit, then compare it with the heater's specified inside diameter. Check the band width, closure gap, terminal position and available connection clearance against the drawing.

Match voltage, wattage and the required operating conditions as well. Do not use the outside diameter of the old heater or force an incorrectly sized band into place.


Does a heater temperature rating tell me how hot my equipment will get?

No. A heater's stated surface temperature or maximum operating limit is different from the temperature reached by the liquid, air or equipment it heats. The result depends on heat losses, insulation, airflow or liquid movement, mounting and the amount of material being heated.

Choose the heater and control system for the complete application. A temperature rating alone cannot establish room coverage, heat-up time or suitability for a furnace or sauna.


Does a self-regulating PTC heater still need temperature control?

PTC behaviour limits the heater's output as it warms, but it does not guarantee a precise temperature throughout an enclosure or on the item being heated. Actual performance depends on the model, supply voltage, mounting and heat dissipation.

Use the product instructions to determine the required airflow, controls and overtemperature protection. Where a specific process or enclosure temperature is needed, use a suitable sensor and control system.


Loading...
Back to top