Overview
The ultra-thin dry-fired MCH (Metal Ceramic Heater) is an advanced heating element constructed by printing metal tungsten paste onto a ceramic casting blank, laminating, and sintering at high temperatures. It provides rapid thermal response, high thermal efficiency, uniform heating, and excellent corrosion resistance.
Key Features
- Rapid temperature rise and fast thermal compensation
- Uniform heating with high power density
- Linear resistance-temperature relationship for simplified temperature control
- High insulation performance with a safe, uncharged surface
- Resistant to acid, alkali, and other corrosive environments
Available Options
- Dimensions: 7x5x1.2 mm
- Electrical Ratings: 12V / 22W (500°C), 12V / 10W (300°C), 12V / 5W (270°C), 5V / 4W (240°C), 12V / 2.5W (200°C)
Operating Guidelines & Safety
- Long-term operation must remain within the rated voltage and below the 500°C temperature limit.
- Avoid sudden thermal shocks; sharp temperature differences can cause expansion and damage the internal tungsten heating layer.
- Installation pressure must be less than 2 kg/cm²; it is recommended to use a special stainless steel circlip or elastic pressure.
- The lead wire connections are not waterproof; avoid all contact with liquids.
Package Contents
- 1 x MCH Heater
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent