MCH Ceramic Heaters

Miniature High Temperature Ceramic Heating Plate MCH Alumina Heater Element

Reference: AH100417
High-efficiency miniature MCH ceramic heating plate made of multilayer alumina ceramic for rapid heating applications.

Choose configuration

Power
Voltage
Temperature
Product overview

Overview

This miniature high-temperature ceramic heating plate is constructed using Metal Ceramics Heater (MCH) technology. It features a tungsten paste printing heating material sintered on a white multilayer alumina ceramic base plate under a high-temperature hydrogen atmosphere.

Features

  • High thermal efficiency and rapid temperature rise and compensation
  • Uniform thermal distribution with high power density
  • Good insulation performance and chemical resistance against acids and alkalis
  • Linear resistance-temperature change for easy control

Specifications & Materials

  • Base Plate: White multilayer alumina ceramic (α-Al2O3 content not less than 95%)
  • Heating Material: High-density tungsten paste printing heating material
  • Lead Wire: High-temperature 0.5 mm nickel wire with PTFE sheath
  • Dimensions: 20 x 20 x 2 mm
  • Maximum Operating Temperature: Within 500 °C

Usage Instructions & Safety Warnings

  • Long-term operation must remain within the rated voltage and below 500 °C temperature control.
  • Avoid sudden thermal shocks (hot and cold); sharp temperature differences can cause the heating plate to expand and damage the tungsten wire heating layer.
  • Installation pressure must be kept under 2 kg/cm²; it is recommended to use a special stainless steel circlip or elastic pressure.
  • Leads are best connected via snap-on methods using high-temperature resistant wire.
  • The lead connection is not waterproof; avoid contact with liquids.

Applications

Widely used in rapid heating devices such as hair straighteners and curlers, heaters, electronic cigarettes, aromatherapy ovens, instant water heaters and faucets, clothes dryers, and medical infrared physiotherapy instruments.

Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Product Type MCH heating plate
Dimensions 20 × 20 × 2 mm
Lead Wire Material Nickel wire + PTFE sheath
Plate Material Alumina Ceramic (≥95% Al₂O₃)
Operating Temperature Within 500 °C
Loading...
Back to top