MCH Ceramic Heaters

High-Temperature MCH Ceramic Heater Plate Aluminum Oxide Heating Element

Reference: AH100489
High-temperature MCH aluminum oxide ceramic heater plate offering rapid thermal response and uniform heating for various appliances.

Choose configuration

Power
Voltage
Temperature
Product overview

Product Overview

High-temperature Metal Ceramics Heater (MCH) plate constructed from white multilayer alumina ceramic with an alpha-Al2O3 content of not less than 95%. It utilizes high-density tungsten paste printing for the heating material and features 0.5mm nickel wire leads with a PTFE sheath.

Available Options

  • 3.7V 3W 80C
  • 5V 4W 90C
  • 5V 5W 120C
  • 12V 24W 250C
  • 12V 28W 300C
  • 15V 45W 400C
  • 20V 70W 500C
  • 24V 80W 500C
  • 24V 115W Tem ctrl

Features

  • Simple structure with good thermal uniformity and a high power density of ≥ 45 W/cm²
  • Linear resistance-temperature change for easy temperature control via resistance or voltage
  • Rapid temperature rise and thermal compensation
  • High thermal efficiency, uniform heating, and energy saving (unit heat consumption is 20-30% lower than PTC)
  • Good insulation performance with a surface that remains uncharged; withstands a voltage test of 4500V/1S without breakdown and a leakage current of less than 0.5mA
  • Resistant to acid, alkali, and other corrosive substances

Specifications Table

PropertyValue
Product TypeMCH heating plate
Plate MaterialWhite multilayer alumina ceramic (α-Al2O3 content ≥ 95%)
Heating Element MaterialHigh-density tungsten paste
Lead Wire MaterialHigh temperature 0.5mm nickel wire + PTFE sheath
Operating TemperatureWithin 500 °C

Usage Instructions & Safety Warnings

  • For temperature control use, long-term operation must remain within the rated voltage and temperatures under 500 °C.
  • Avoid thermal shock. Sharp temperature differences can cause the heating plate to expand and damage the tungsten wire heating layer.
  • Installation pressure must be less than 2 kg/cm²; it is recommended to use a special stainless steel circlip or elastic pressure.
  • The lead is best connected via a snap-on method with a high-temperature resistant wire.
  • The heating body lead connection is not waterproof; avoid contact with liquids.

Applications

Widely used in daily life, industrial and agricultural technology, communications, environmental protection, industrial drying equipment, and electric heat adhesive devices such as hair straighteners, hair curlers, heaters, cigarette lilies, electronic cigarettes, aromatherapy ovens, air conditioners, instant water heaters, faucets, multi-function microwave ovens, clothes dryers, coffee pots, medical devices, and infrared physiotherapy instruments.

Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Product Type MCH heating plate
Lead Wire Material 0.5 mm nickel wire + PTFE sheath
Plate Material White Multilayer Alumina Ceramic (≥95% Al₂O₃)
Operating Temperature Within 500 °C
Loading...
Back to top