MCH Ceramic Heaters

High-Temperature Alumina Ceramic MCH Heater Plate 28x15x1.3mm

Reference: AH100420
High-temperature alumina ceramic MCH heater plate featuring fast thermal response, uniform heating, and excellent insulation performance.

Choose configuration

Power
Voltage
Temperature
Product overview

Product Overview

This high-temperature MCH (Metal Ceramics Heater) plate is constructed from white multilayer alumina ceramic with an alpha-Al2O3 content of at least 95%. It utilizes a high-density tungsten paste heating material for rapid thermal response, uniform heating, and high thermal efficiency.

Features

  • Rapid temperature rise and fast thermal compensation
  • High thermal efficiency with uniform heating
  • Linear resistance-temperature change for easy temperature control
  • Good insulation performance with a surface that remains safe and uncharged
  • Resistant to acids, alkalis, and other corrosive substances

Specifications

PropertyValue
Product TypeMCH Heating Plate
Dimensions28x15x1.3mm
Plate MaterialWhite multilayer alumina ceramic (≥95% α-Al2O3)
Heating MaterialHigh-density tungsten paste
Lead Wire MaterialHigh-temperature 0.5mm nickel wire with PTFE sheath
Maximum Operating TemperatureWithin 500 °C
Power Density≥ 45 W/cm²
Withstand Voltage4500V / 1S (leakage current < 0.5mA)

Available Options

The heating plate is available in multiple voltage, power, and temperature configurations:

  • 3.7V / 1W / 55°C
  • 5V / 2.5W / 100°C
  • 5V / 2W / 85°C
  • 3.7V / 9W / 200°C
  • 3.7V / 3W / 80°C
  • 12V / 12W / 220°C
  • 9V / 55W / 450°C
  • 5V / 16W / 280°C
  • 5V / 4W / 130°C
  • 24V / 60W / Temp Control
  • 24V / 50W / Temp Control
  • 12V / 24W / 330°C
  • 12V / 14W / 250°C
  • 24V / 96W / Temp Control

Safety and Usage Instructions

  • Long-term operation must remain within the rated voltage and below 500°C.
  • Avoid rapid thermal shocks (hot and cold transitions) to prevent damage to the tungsten heating layer.
  • Installation pressure must be less than 2 kg/cm²; use a special stainless steel circlip or elastic pressure.
  • Lead connections are not waterproof; avoid contact with liquids.
Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Product Type MCH heating plate
Dimensions 28 × 15 × 1.3 mm
Lead Wire Material 0.5 mm nickel wire with PTFE sheath
Maximum Operating Temperature 500 °C
Plate Material White Multilayer Alumina Ceramic (≥95% Al₂O₃)
Loading...
Back to top