High-temperature metal ceramic heater (MCH) plate featuring a white multilayer alumina ceramic substrate with an alpha-Al2O3 content of at least 95% and high-density tungsten paste heating elements.
Features
- Rapid temperature rise and fast thermal compensation
- High thermal efficiency, uniform heating, and energy saving
- Good insulation performance and resistance to corrosive substances
Available Options
- 24V 30W 260C
- 24V 60W 400C
- 12V 48W 370C
- 12V 96W 460C
- 220V 100W 500C
- 24V 190W Temp ctrl
- 36V 80W 450C
- 5V 1.5W 50C
- 5V 2.5W 65C
- 3.7V 1.5W 50C
- 3.7V 9W 150C
- 12V 8W 150C
- 12V 14W 200C
- 5V 8W 140C
- 5V 16W 190C
Usage Instructions & Safety
- Long-term work must be within the rated voltage and temperature control must remain below 500 °C.
- Avoid rapid thermal shocks (hot and cold), as sharp temperature differences can cause the heating plate to expand and damage the tungsten wire layer.
- Installation pressure must be less than 2 kg/cm²; it is recommended to use a special stainless steel circlip or elastic pressure.
- The lead connections are not waterproof; avoid contact with liquids.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent