MCH Ceramic Heaters

Miniature High Temperature Ceramic Heating Plate MCH Aluminum Oxide Heater

Reference: AH100510
Compact 45x45x1.3mm MCH aluminum oxide ceramic heating plate providing rapid, efficient, and uniform heating.

Choose configuration

Power
Voltage
Temperature
Product overview

Miniature MCH Ceramic Heating Plate

This compact metal ceramic heater (MCH) is constructed from high-density alumina ceramic with printed tungsten heating elements. It delivers rapid thermal response, high thermal efficiency, and uniform heat distribution for precise temperature control.

Features

  • High heating rate and rapid thermal compensation
  • Uniform temperature distribution with high power density
  • White multilayer alumina ceramic base plate (alpha-Al2O3 content not less than 95%)
  • High-temperature nickel wire leads with PTFE sheath

Available Options

  • 5V 3W 45C
  • 12V 7W 80C
  • 12V 18W 120C
  • 24V 28W 160C
  • 24V 72W 250C
  • 36V 65W 260C
  • 36V 160W 350C
  • 48V 115W 330C

Specifications Table

PropertyValue
Dimensions45 x 45 x 1.3 mm
Base Plate Material95% Alumina Ceramic
Heating MaterialTungsten paste
Lead Wire0.5 mm nickel wire with PTFE sheath
Maximum Operating Temperature500 °C

Usage Instructions and Safety Warnings

  • Long-term operation must remain within the rated voltage and below 500 °C.
  • Avoid rapid thermal shocks to prevent expansion damage to the tungsten heating layer.
  • Installation pressure must be less than 2 kg/cm2; it is recommended to use a special stainless steel circlip or elastic pressure.
  • Lead connections are not waterproof; avoid contact with liquids.
Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Product Type MCH heating plate
Dimensions 45 × 45 × 1.3 mm
Lead Wire Material Nickel Wire with PTFE Sheath
Maximum Operating Temperature 500 °C
Plate Material Alumina Ceramic (≥95% Al₂O₃)
Loading...
Back to top