Product Overview
This MCH (Metal Ceramics Heater) high-temperature heating plate is constructed from white multilayer alumina ceramic with an alpha-Al2O3 content of not less than 95%. It utilizes high-density tungsten paste printing for the internal heating circuit and features high-temperature nickel wire leads with PTFE sheathing.
Features
- Efficient thermal performance and rapid temperature rise
- High thermal conductivity and quick thermal compensation speed
- White multilayer alumina ceramic base plate (alpha-Al2O3 content >= 95%)
- Equipped with high-temperature 0.5 mm nickel wire and PTFE sheath leads
- Resistant to acid, alkali, and other corrosive substances
Available Options
- 100x8.9mm: 12V 1.5W (40°C), 24V 6W (90°C), 36V 14W (120°C), 48V 25W (170°C), 60V 40W (250°C), 110V 120W
- 100x16mm: 5V 1W (40°C), 5V 5W (60°C), 12V 8W (90°C), 12V 16W (120°C), 12V 28W (190°C), 24V 32W (200°C), 24V 60W (300°C), 24V 115W (390°C), 36V 65W (290°C), 36V 140W (400°C), 48V 130W (380°C)
Technical Specifications
| Property | Value |
|---|---|
| Plate Material | White multilayer alumina ceramic (alpha-Al2O3 >= 95%) |
| Heating Element Material | High-density tungsten paste |
| Lead Wire Material | 0.5 mm nickel wire with PTFE sheath |
| Maximum Operating Temperature | 500 °C |
| Withstand Voltage | 4500V / 1S without breakdown |
| Leakage Current | < 0.5 mA |
Usage Instructions & Safety Warnings
- Long-term operation must remain within the rated voltage and below the 500 °C temperature limit.
- Avoid thermal shock; sharp temperature differences can cause expansion and damage the internal tungsten wire heating layer.
- Installation pressure must be kept below 2 kg/cm2 (use of a specialized stainless steel circlip or elastic pressure is recommended).
- The lead connection is not waterproof; avoid contact with liquids.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent