This industrial ceramic MCH (Metal Ceramics Heater) heating element is constructed from high-density tungsten paste printing heating material on a white multilayer alumina ceramic base plate (with an a-Al2O3 content of not less than 95%). It delivers efficient, uniform heating, high thermal efficiency, and fast thermal compensation.
Features
- High-density tungsten paste printing heating material
- White multilayer alumina ceramic base plate (a-Al2O3 content ≥ 95%)
- High temperature resistant Φ 0.5 mm nickel wire lead with PTFE sheath
- High thermal efficiency and energy-saving performance
- Good thermal uniformity and high power density (≥ 45 W/cm2)
- Resistant to acid, alkali, and other corrosive substances
Available Options
- 120x49 220V200W210C
- 85x40 220V200W430C
- 105x43x2 12V3W30C
- 105x43x2 24V25W80C
- 105x43x2 36V55W150C
- 105X43X2 48V100W200C
Usage Instructions & Safety Warnings
- For temperature control use, long-term work must be within the rated voltage and below 500 °C.
- Avoid rapid thermal shock. Sharp temperature differences can cause the heating plate to expand and damage the tungsten wire heating layer.
- Installation pressure must be less than 2 kg/cm2; it is recommended to use a special stainless steel circlip or elastic pressure.
- The lead wire is best connected via a snap-on method with a high-temperature resistant wire.
- The heating body lead connection is not waterproof; avoid contact with liquids.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent