Product Overview
Semiconductor refrigeration chips utilize the thermoelectric effect of semiconductors. When direct current passes through a thermocouple formed by connecting two different semiconductor materials in series, the cold and hot ends respectively absorb and release heat, making them an ideal choice for temperature cycling applications.
No refrigerant is required, and the module can work continuously without any pollution source, rotating parts, or sliding components. It operates without vibration or noise, offers a long lifespan, and is easy to install.
Available Options
Available chip models include TEC1-12702, TEC1-12703, TEC1-12704, and TEC1-12703S.
Important Installation and Safety Warnings
- Do not power on without heat dissipation: Directly powering on without heat dissipation will cause both sides to heat up rapidly within seconds, which will burn out the refrigeration fins. The higher the power, the greater the heat generation and the greater the heat dissipation required.
- Thermal Grease Required: It is necessary to coat the heat dissipation surface with thermal conductive silicone grease and install a radiator or water-cooled cooling device before use.
- Hot End Temperature Limit: The hot surface temperature of the semiconductor refrigeration should not exceed 60 °C, otherwise there is a possibility of damage.
- Condensation Prevention: When the temperature of the ceramic surface drops, condensation may occur. Keep the cooling surface around 20 °C or install an anti-condensation insulation ring to isolate it from the air.
Installation Instructions
- Apply thermal conductive silicone grease on the heat dissipation surface of the semiconductor refrigeration chip.
- Install the semiconductor refrigeration chip onto the heat sink and place insulation pads around it.
- Connect to a direct current power supply for cooling.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent