Thermoelectric Coolers

Thermoelectric Cooler Peltier 40x40mm Semiconductor Refrigeration Plate Module

Reference: AH100822
Semiconductor refrigeration plate module offering reliable thermoelectric cooling for small spaces, car fridges, and temperature cycling applications.

Choose configuration

Chip Model
Product overview

Product Overview

Semiconductor refrigeration chips utilize the thermoelectric effect of semiconductors. When direct current passes through a thermocouple formed by connecting two different semiconductor materials in series, the cold and hot ends respectively absorb and release heat, making them an ideal choice for temperature cycling applications.

No refrigerant is required, and the module can work continuously without any pollution source, rotating parts, or sliding components. It operates without vibration or noise, offers a long lifespan, and is easy to install.

Available Options

Available chip models include TEC1-12702, TEC1-12703, TEC1-12704, and TEC1-12703S.

Important Installation and Safety Warnings

  • Do not power on without heat dissipation: Directly powering on without heat dissipation will cause both sides to heat up rapidly within seconds, which will burn out the refrigeration fins. The higher the power, the greater the heat generation and the greater the heat dissipation required.
  • Thermal Grease Required: It is necessary to coat the heat dissipation surface with thermal conductive silicone grease and install a radiator or water-cooled cooling device before use.
  • Hot End Temperature Limit: The hot surface temperature of the semiconductor refrigeration should not exceed 60 °C, otherwise there is a possibility of damage.
  • Condensation Prevention: When the temperature of the ceramic surface drops, condensation may occur. Keep the cooling surface around 20 °C or install an anti-condensation insulation ring to isolate it from the air.

Installation Instructions

  1. Apply thermal conductive silicone grease on the heat dissipation surface of the semiconductor refrigeration chip.
  2. Install the semiconductor refrigeration chip onto the heat sink and place insulation pads around it.
  3. Connect to a direct current power supply for cooling.
Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Voltage 12 V
Model Number TEC1-12702, TEC1-12703, TEC1-12704, TEC1-12703S
Wire Length 100 mm to 300 mm
Dimensions 40 × 40 mm
Lead Wire Material High temperature nickel wire + PTFE sheath
Dry Heating Surface Temperature 60 °C
Maximum Current 2 A to 4 A across offered models
Maximum Voltage 15.8 V
Cooling Capacity 17 W to 35 W across offered models
Loading...
Back to top