Semiconductor refrigeration chips utilize the thermoelectric effect of semiconductors. When direct current passes through a thermocouple formed by connecting two different semiconductor materials in series, the cold and hot ends respectively absorb and release heat, making them an ideal choice for temperature cycling applications. No refrigerant is required, and the unit can work continuously without pollution sources, rotating parts, vibration, or noise.
Features
- No refrigerant required; operates without vibration or noise
- Long lifespan and easy installation
- Suitable for continuous operation in small spaces
Available Options
- 3118 8X8mm
- 12702 25x25mm
- 12703 20x20mm
- 12703 30x30mm
- 4902 20X20mm
- 4903 20x20mm
- 7102 23x23mm
- 7103 23x23mm
- 7103 25x30mm
- 12706 40x40mm
- 12708 40x40mm
- 12710 40x40mm
Installation and Usage Instructions
Crucial Warning: This unit cannot be directly connected to a power supply without proper cooling and must be properly cooled before being powered on. Directly powering on without heat dissipation will cause both sides to heat up rapidly within seconds, which will burn out the refrigeration fins.
- Apply thermal conductive silicone grease on the heat dissipation surface before use.
- Install a radiator or water-cooled cooling device on the heat dissipation surface. The hot surface temperature must not exceed 60 °C.
- Place insulation pads or an anti-condensation ring around the chip to prevent dew condensation when the surface temperature drops.
- Test polarity with a dry battery briefly (within 1 second) to determine cold and hot ends.
Package Contents
- 1 x Peltier Plate
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent