Overview
This high-temperature metal ceramic heating (MCH) element is constructed from white multilayer alumina ceramic with high-density tungsten paste printing. Designed for rapid thermal compensation, high thermal efficiency, and uniform heating, it serves as a reliable component for appliances requiring precise thermal control.
Features
- Rapid temperature rise and fast thermal compensation
- High thermal efficiency and energy-saving performance
- Good insulation performance with a surface that remains safe and uncharged
- Resistant to acid, alkali, and other corrosive substances
Specifications
| Property | Value |
|---|---|
| Product Type | MCH Micro High-Temperature Heating Pad |
| Dimensions | 35x10x1.2 mm |
| Plate Material | White multilayer alumina ceramic (alpha-Al2O3 content >= 95%) |
| Heating Element Material | Tungsten |
| Lead Wire Material | 0.5 mm high-temperature nickel wire with PTFE sheath |
| Maximum Operating Temperature | 500 °C |
Available Options
The heating element is available in multiple configurations combining voltage, power, and temperature ratings:
- 3.7V / 2W / 80°C
- 3.7V / 3W / 110°C
- 5V / 0.2W / 50°C
- 5V / 3.5W / 100°C
- 5V / 5W / 160°C
- 12V / 1.5W / 120°C
- 12V / 5W / 140°C
- 12V / 10W / 210°C
- 12V / 20W / 280°C
- 12V / 30W / 380°C
- 20V / 55W / 450°C
- 24V / 6W / 150°C
- 24V / 25W / 300°C
- 24V / 40W / 420°C
- 24V / 80W / Temperature Controlled
- 36V / 50W / 420°C
Usage Instructions & Safety
- For temperature-controlled use, long-term operation must remain within the rated voltage and below 500 °C.
- Avoid thermal shock; sharp temperature differences can cause expansion and damage the internal tungsten wire heating layer.
- Installation pressure must be kept below 2 kg/cm2; use a special stainless steel circlip or elastic pressure.
- Lead wire connections should be snap-on connected using high-temperature resistant wire.
- The lead connection point is not waterproof; avoid contact with liquids.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent