Overview
Self-regulating heating cable designed for household drinking water pipe, drain pipe freeze protection in winter, and other heating applications. The cable automatically regulates its output power according to temperature to prevent overheating.
Features
- Self-regulating output power based on ambient temperature
- High-quality PE jacket and PE composite insulation layer
- Tinned copper wire conductor
Technical Specifications
| Property | Value |
|---|---|
| Working Voltage | 200–240 V AC |
| Rated Power | 20 W/m (at 10 °C) |
| Max Maintain Temperature | 65 °C |
| Max Enduring Temperature | 135 °C |
| Width | 8.1 mm |
| Thickness | 3 mm |
| Min Bend Radius | 15 mm |
| Max Circuit Length | 30 m |
Installation Steps
- Seal the end of the cable with a heat shrinkable tube or electrical insulating tape. Do not connect the two conductors together.
- Connect the other end with a cold wire or plug to connect to the power supply.
- Wrap the heating cable on water pipes or fasten it straight along the pipes. Fasten the cable every 30–60 cm with thermal tape or aluminum tape.
- Optional: Wrap a layer of rubber insulation on the pipe to enhance heating efficiency and save energy.
- Connect or plug into a 220–240 V power supply.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent