Thermoelectric Coolers

Semiconductor Refrigeration Chip Peltier Thermoelectric Cooler Plate

Reference: AH100827
High-efficiency semiconductor refrigeration chip for solid-state thermal management and temperature control applications.

Choose configuration

Model Number
Product overview

Semiconductor refrigeration chips utilize the thermoelectric effect to provide precise temperature control and thermal management without refrigerants or moving parts.

Features

  • Solid-state operation with no moving parts, vibration, or noise
  • Requires no refrigerant
  • Long operational lifespan

Available Options

  • Model Numbers: THC1-12730, TEP1-142T300, THC1-19912, TEG1-199-1.4-0.5, 19808HR

Installation and Usage Instructions

Do not connect directly to a power supply without adequate cooling. Failure to provide proper heat dissipation will cause rapid overheating and destroy the module.

  1. Coat the heat dissipation surfaces with thermal conductive silicone grease.
  2. Install a suitable radiator or water-cooled cooling device on the hot surface.
  3. Place insulation pads around the module.
  4. Connect a direct current power supply.

Safety Warnings

  • The hot surface temperature must not exceed 60°C during operation.
  • Do not power on the refrigeration chip for extended periods without a radiator.
  • Prevent condensation by maintaining the cooling surface temperature around 20°C or using an insulation ring.
Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Wire Length 100–300 mm
Dimensions 44 × 40 mm, 62 × 62 mm
Maximum Voltage 24 V
Loading...
Back to top